TECHNICAL BULLETINS
KEEPING YOU ABREAST OF ALL NEW DEVELOPMENTS
BULLETINS
TECHNICAL BULLETIN: 0005
DATE: August 24th, 2017
SUBJECT: JEEP – JK PENTASTAR (2012 – 2017) SUPERCHARGER SYSTEM IDLER AND SUPERCHARGER PULLEY ALIGNMENT INSTRUCTION
Procedure for adjusting and verifying the alignment of the idler pulleys and supercharger pulley.
Please refer to these instructions to get the best out of your system.
TECHNICAL BULLETIN: 0004
DATE: April 4th, 2016
SUBJECT: TOYOTA 86 / SUBARU BRZ / SCION FR-S, IDLER PULLEY ALIGNMENT
To prevent premature wearing of the supercharger drive belt, the idler pulley mount requires an additional bearing shim to be added to the idler pulley mount, prior to attaching the idler pulley to the idler pulley mount, to improve pulley alignment.
Please refer to these instructions to get the best out of your system.
TECHNICAL BULLETIN: 0003
DATE: February 25th, 2016
SUBJECT: BRZ / FRS GT/GT86 (2012 – 2015) I/C AND NON I/C MODIFIED TUNE INSTALLATION INSTRUCTIONS
The Sprintex supercharger system for the BRZ / FRS GT/GT86 (2012-2015) requires a modified tune which is vehicle specific and optimised for the application.
Please refer to these instructions to get the best out of your system.
TECHNICAL BULLETIN: 0002
DATE: December 15th, 2015
SUBJECT: JEEP JK 3.8 I/C and NON I/C CUSTOM TUNE INSTALLATION INSTRUCTIONS
The Sprintex supercharger system for the Jeep JK 3.8 requires a custom tune file which is vehicle specific and optimised for the application.
Please refer to these instructions to get the best out of your system.
TECHNICAL BULLETIN 0001
DATE July 10th, 2015
SUBJECT CHRYSLER 3.6 PENTASTAR 2012-2015 COOLING SYSTEMS
It has come to our attention at Sprintex, that Chrysler vehicles equipped with the Pentastar 3.6 V6 engine require special procedures to satisfactorily fill and bleed the engine cooling system.
For proper operation of the vehicle, and to achieve the expected power uplift and acceptable driveability with Sprintex Tuning, it is essential that the engine cooling system be properly filled and bled.
Chrysler maintenance instruction recommends a 20 point procedure to properly fill and bleed the cooling system in these vehicles. This includes use of a vacuum bleeder to fill the system.